facebook facebook rss

logo_RAEDIUM 
Réseau des anciens de l'École de design industriel de l'Université de Montréal

Courriel
Code [?]
Rester connecté | Aide


+  Forum RAEDIUM
|-+  Petites annonces
| |-+  Offres d'emploi
| | |-+  Offre d'emploi Design Industriel/Design d'Intérieur
« sujet précédent | | sujet suivant »
Pages: [1] Répondre | Imprimer
Auteur Fil de discussion: Offre d'emploi Design Industriel/Design d'Intérieur  (Lu 16613 fois)
Camille Moussette
Cohorte 2004
Administrateur
*****
Messages: 148


« le: 13 Mai 2009 à 08:51:39 » Citer en réponse

Notre client dans le domaine du transport (ferroviaire) recherche une personne ayant une solide expérience pratique dans le Design d'Intérieur.

Le candidat idéal sera diplômé en Design Industriel et possèdera environ 2 à 5 ans d'expérience pratique. Il sera capable d'analyser et de développer des solutions techniques, de même que préparer divers documents, tels des directives d'installations, des réquisitions pour l'achat de matériel et des devis. Il s'agit d'un contrat d'un AN (remplacement de congé de maternité) auprès d'un client important bien établi dans leur domaine

Description plus détaillée en anglais:


On behalf of our client we are currently seeking an industrial designer for a contract opportunity in Montreal.

JOB SUMMARY
- To investigate, conceptualize, design, and detail rolling stock configuration changes on primarily interior configuration change modifications and signage, using conceptual knowledge in problem solving in accordance with industry and company standards. May also address other interior ancillary components.

KEY RESPONSABILITIES:
For multiple equipment modifications:
- Prepares the scope of work and confirms feasibility based on the originators requirements.
- Proposes a preliminary design and estimates material, labor, and engineering costs.
- Validates the design and costs by supervising a prototype installation with unionized labor.
- Finalizes the design and prepares the fleet modification instructions along with the required specifications, requisitions, and tender documents for approval.
- Defines the maintenance requirements for the new configuration.
- Proposes the quality and environmental program requirements as well as performing health and safety impact assessments.
- Supports the procurement activities.

For new overhaul programs:
- Reviews equipment performance to establish the optimum maintenance frequency
- Proposes the scope of work.
- Develops overhaul specifications.
- Estimates engineering, material and labour costs
- Monitors the start up of the program and makes adjustments as required.

Documentation:
- Prepares drawings for verification.
- Prepares Bills of Material and Material Stocking Requests for the modifications and programs.
- Proposes Service Bulletins for configuration changes
- Proposes the maintenance frequency and procedures for the rolling stock

Supervision: May be required to supervise the following to different degrees:
- Technically supervise prototypes.
- Participate in design reviews for contracted work.
- Interface with consultants to ensure they comply with the scope of work.
- Technically supervise temporary resources,

RESPONSIBILITY/CONTRIBUTION PROFILE
- Using knowledge and experience in own discipline analyses and solves straightforward problems using standard procedures under moderate guidance and direction,
- Understands and uses key business drivers in work while broadening skills,
- Identifies and solves problems in straightforward situations using standard procedures.
- Responds to non standard requests from internal and external customers and investigates with assistance from others as needed.
- Explains information and persuades others in straightforward situations.
- Makes decisions within guidelines and policies that impact own priorities.
- Is accountable for technical contribution to project team. Is aware of costs and assists in controlling costs related to own work.

QUALIFICATIONS:
- Bachelor in Industrial Design
- Minimum 2-5 years experience
- Microsoft Office, CAD software. Adobe Illustrator and Photoshop.
- Knowledge of fabric, material and manufacturing processes.
- Basic knowledge of mechanical design principles

Andrea Slobodova
Ian Martin Ltd
Technical Recruiter
slobodova@ianmartin.com
Tel.(514) 338-3800, ext. 3224
Toll free:  1-866-307-9675
Journalisée
Pages: [1] Répondre | Imprimer 
« sujet précédent | | sujet suivant »
Aller à:  


Propulsé par MySQL Propulsé par PHP Powered by SMF | SMF © 2006-2008, Simple Machines LLC XHTML 1.0 Transitionnel valide ! CSS valide !